GRANADA UGR≤22 CCT3 Selectable

This great looking recessed downlight replaces traditional 2 x 26W and 2 x 35W T8 fittings on a one for one basis. With no replacement lamp costs and energy savings approaching 50%, these fittings make a significant contribution to reducing CO2 emissions. A recessed SMD light engine and slightly narrower beam angle makes this fitting particularly suitable for display or accent lighting while reducing glare to less than UGR22 for most lighting designs.


    • High quality powder coated pressed aluminium body and trim
    • Great aesthetics with clean look
    • High reflectance 60-degree silvered reflector with combined faceted and smooth finish
    • Provides high efficiency light output
    • Uniform light distribution without dark areas
    • Low glare and UGR ≤22 for most installations
    • Strong stainless-steel springs clips
    • With protective rubber pads
    • Ensures the fitting is pulled up close to the ceiling – neat finish
    • No brown rust staining if used in damp voids
    • Ceiling is not damaged during installation
    • High lumen low power alternative to 2 x 26W and 2 x 35W T8
    • A lumen for lumen replacement so ideal for one for one retrofit
    • High efficacy with almost 50% energy savings
    • Optional: Universal dimming driver HED2040-D
    • Allows automatic dimming (daylight harvesting) using DALI or
      1-10v controls/sensors
    • Manual functional dimming using retractive push to make switch
    • Utilises high quality MTC Optronics independently tested LM80 SMD LED’s
    • Industry standard TM21 extrapolation method is used to accurately determine Rated LED Life
    • LM79 tested to produce accurate lighting design files
    • Many suppliers quote LED lifetime performance without being able to substantiate the information
    • Results from our rigorous testing show these fittings to have:
      • High initial lumen output for maximum fitting utilisation
      • Low lumen depreciation over time for long effective life
      • Constant colour temperature and CRI without shift for long life light uniformity and quality
      • Exceptionally long Rated LED Life for low maintenance costs
    • Colour Temperature selectable
    • Choice of 3,000K, 4,000K or 6,500K to suit the use of the lit space. It can also be changed if the tasks change in the area
    • State of the Art electronic driver with secondary plug and play connector to the fitting
    • 240V Primary side has 300mm of 2-core flex and Plug
    • Provides optimum drive current for maximum LED light output and long life
    • Plug and play connectors between fitting and driver
      Suitable for optional HED2040-D driver
    • Solid State technology with no heat filaments or electrodes
    • No failures due to cold to hot to cold cycles or building vibrations
    • “Instant On” - can be used with PIR’s, microwaves or photocells
    • Wide ambient operating temperature range
    • Suitable for use in extremes of hot or cold temperatures


  • Retail shops
  • Shopping centre circulation areas
  • Museums and art galleries
  • Exhibition and display stands
  • Restaurants
  • Reception areas


Case Studies